This CleakFreak 500 PSI commercial carpet extractor is the perfect alternative to our 100 PSI model if you are in need of a little more cleaning power. They both have the same great engineering, but the 500 PSI extractor just has a little more power under the hood. With an 11 gallon solution tank and a 13 gallon recovery tank, you will never come up short handed during your average cleaning job. We even include a 12" wide single jet carpet wand so you can get started cleaning right away! Grab some optional upholestery tools and you are all set to clean carpeted stairs, upholstered furniture, and occasionally do automotive cleaning.
Compare this machine to our complete line of cold water carpet cleaners, and you'll clearly see the value of this unit. One of the greatest features of this CleakFreak® adjustable pump carpet extractor is its simplicity. As you can see from the control panel pictured to the right, there isn't too much to operating the unit. Just flip on the pump and either a single vacuum motor, or both of them, depending on how much water you need to recover, and go!
*Note: If your extractor has any chance of being exposed to freezing temperatures you'll need to "winterize" it. To winterize your machine, drain out as much water as you possibly can. Then pour about a 1/2 gallon of windshield wiper fluid into the empty solution tank, turn on the pump, and draw the fluid through the machine. The next time you use the extractor, make sure to run a full tank of clear water through the system before you start to use it.