With the Maxim Renew Carpet Encapsulation Cleaner, you get an interim encapsulation cleaner that not only effectively cleans all types of carpeting, but it also continues to clean your carpeting every time you vacuum. The encapsulation technology effectively surrounds dirt and soils to eliminate their "stickiness" and allow them to be vacuumed up, instead of staying attached to the carpet fibers and attracting other dirt.
Simply pre-mix the solution at 4 ounces per gallon of water, and pre-spray your intended cleaning area with a pump up sprayer. It is usually best to start in small, sectioned areas. Then scrub with a floor buffer, and several carpet bonnets. Then simply allow the area to dry, and routinely vacuum. The greatest part of this process, is that no additional work is needed after the initial cleaning The commercial institutions, should already have a routine vacuuming schedule set that will continue to clean the carpet over time.
Safe for use on wool carpets, upholstery, stain resistant and standard carpets. This process should be used only as interim commercial cleaning tool, and not as replacement to full carpet extraction. A full extraction of the carpet should occur after every 2 -3 encapsulation cleanings.
For a more comprehensive selection of our carpet cleaning chemicals, please check out our full lines of carpet cleaning chemicals that we have available.
Directions
Thoroughly vacuum carpeted areas that need to be cleaned.
Dilute product at 4 ounces per gallon of water.
Pre-spray desired area & let solution dwell for 5 to 10 minutes. It is best to work in small sections, like a 10' x 10' area.
Soak a carpet bonnet in the solution and then wring out and attach to the pad driver of a floor buffer.
When carpet bonnet becomes overly saturated with dirt, flip over and use the other side, or switch out for a new one.
Go back to step 4 and repeat until entire area has been scrubbed.
